Movement LXE G4, Инструкция по эксплуатации

Страница: 16 / 96

ASSEMBLING THE EQUIPMENT
Allen n°6
Allen n°8
TORQUE SPECIFICATION OF SCREW
TIGHTENING TABLE
ICONS
50% 100%
Do not
completely
tighten the
screws
Do the
final tightening
of the bolts
16
Thread Lock
Medium torque
CAREFUL!
Before starting to assemble the elliptical it is necessary to be alert to the
following:
•
Check that the packaging is not damaged and the parts and components of
the equipments are not broken in any way.
•
It is recommended that the elliptical is taken out from its packing in the area
where it is to be assembled.
•
The assembly area should be clean.
•
The floor ought to be flat and a leveled to avoid destabilizing the elliptical.
•
The space around the elliptical should be kept free from anything as
described in this Manual (see Chapter on Operational Instruction)
•
It is recommended that the elliptical is assembled far from any place that is
damp and away from sunlight in order to avoid damage to the equipments
electrical components.
In order to assemble the equipment the following tools are needed:
Fixed Wrench 13
Diameter