1. Please read the instructions carefully before use.
2. Keep ngers away from the gear when the motor is working
to avoid possible injury.
3. Keep the motor gear set against the lens gear and tighten the
motor lock screw when mounting motors.
4. Re-calibrate the motor every time after changing lens and
motor position to avoid possible damage to lens.
5. Hand control unit and receiver box must be set at the same
channel to achieve wireless transmission.
6. Make sure the battery is fully-charged before updating
software. Do not turn off the power or turn off the system
during updating.
7. Operation Environment: Operation Temperature: -20--
50°C, Humidity: 20% --90% RH (non-condensing)
Caution:
User Guide
Wireless
LensControlSystem
