16
MCTC manual
The MCTC production screen
3.4.1
Injection Molding mode
1.
Material selection button. Through this button the material can be stored during production.
2.
Percentage of additive to be dosed in relation to the entered shot weight.
3.
Shot weight of the injection molding machine. Used for calculating the additive to be dosed.
4.
Set dosing time (only visible in INJ
–
TIMER mode).
5.
Tools menu. In this menu different settings can be made to the system. Check the
“MCTC_Manual_General” for more detailed information.
6.
Start/Stop button. When the button is colored green, the system is OFF (safe). In red condition the
system is ON.
7.
Toggle button. With this button you can toggle between the normal and the detailed view.
8.
Actual RPM.
9.
Actual Hopper weight.
10. Actual dosing time. Starting at the set time (4) and counting down to 0 seconds. Only visible in INJ -
TIMER mode.
1
3
2
4
6
5
9
8
10
7
