M
B
F
5
4
E. Test of the Compressor (K5 connected to B)
o
1
Speed control (male screw) :
(K2)
N mini
N maxi
Caution :
Consult the Instructions 1401-AA00 regarding the speed range.
o
2
Gear box split position :
o
Low
o
High
o
3
The split selected is locked.
o
4
The speed range used is locked.
o
5
Relief valve pressure :
o
2 bar
o
2.3 bar
o
2.5 bar
o
6
Control of the opening of the relief valve.
(K3, K5)
o
7
Temperature measurement of the compressor
(K3, K4, K5)
•
Run the compressor for 45 minutes at the maximum speed.
•
Set the pressure to 2.5 bar, measured at point B.
•
Measure the temperature at points M and F with an eyelet. Temperature < 130°C.
Duration
(min)
Temperature
Ambient
Male Screw (M)
Female Screw (F)
15
'
30
'
45
'
•
Stop the compressor
o
8
Checking for leaks on the oil circuit.
o
9
Check the oil level of the gearbox (according to the manufacturer recommendations).
Or check the oil level of the PTO for SCANIA and VOLVO.
o
10
Check the tightness of the oil filter.
EN
Quick Start Guide
|
SCREW COMPRESSORS – MH6
CONTROL CHECK LIST
Installation Of The Compressor PTO & MH6 Compressor Set
