Mountz FLEXPOWER FLEXC-11PX, Инструкция по эксплуатации

Страница: 10 / 17

MODEL No: FLEXC-3PX
FLEXC-8PX
FLEXC-11PX
FLEXC-12PX
INSTRUCTION MANUAL
10.8V Cordless Shut-off Screwdriver
CHARGER LAMP INDICATIONS
Red Light
Charger is plugged into the AC outlet. Ready to charge
�
Yellow Flashing
1) When the temperature of the battery is too low (<0°C / <32°F), it is in a
trickle charge mode until the temperature of the battery is over (0°C /
<32°F). The lamp will change from the Yellow Flashing to Green Flashing
automatically and start to charge. (If after 70 minutes, the lamp changes
from yellow flashing to yellow lit, consult an authorized dealer.)
2) When the temperature of the battery is too high (>40°C / 104°F), it is in a
trickle charge mode until the temperature of the battery drops under (40°C
/ 104°F). The lamp will change from the Yellow Flashing to Green Flashing
automatically and start to charge. (If after 70 minutes, the lamp changes
from yellow flashing to yellow lit, consult an authorized dealer.)
3) When the voltage of the battery is too low (below 9 voltage), it is in a
trickle charge mode until the voltage of the battery reaches the standard
value. The lamp will change from the Yellow Flashing to Green Flashing
automatically and start to charge. (If after 20 minutes, the lamp changes
from yellow flashing to yellow lit, consult an authorized dealer.)
Yellow Light
The battery and the charger are not connected. If the yellow lit still on after
trying re-attach the battery, consult an authorized service center.
Green Flashing
Now start charging
Green Flashing
Battery is approximately 50% charged