EZ-TorQ-III User Manual
mountztorque.com - 1080 N 11
th
St - San Jose CA 95112 - 408.292.2214
8
4.
Graph
No
Item
Description
1
Torque
Peak torque, Track torque or First-peak torque at each mode
2
Final peak (only
First-Peak)
Final torque value on the First-Peak mode.
3
Parameters
Parameters on the advanced view operation.
4
OK Zone
OK zone can be created by the ON/OFF switch when there is a target torque set.
The target torque setting is the red line.
The Min/Max tolerance from the target will create the green zone on the graph
5
Y-axis max torque
Y-axis shows the max torque,
The max torque applied is refreshed by real-time monitoring. X,Y scale is automatically rescaled
by the collected data.
6
X-axis time (ms)
X-axis shows the time in ms (milli-second).
Sampling rate is 1ms.200 total data points can be captured without data compression.
A total of 5,000 data points ( 5 seconds) can be compressed and displayed
7
Manual reset
Clear the display by touching the circle area
