Put 4 Concrete Wall Anchors (not included in the package) into
drilled holes, and tap each anchor flush with the wall by using a
hammer. Then put 4 lag bolts through the washers into
the anchors, and tighten each bolt by using a socket wrench to
mount the wall plate securely.
Before totally tightening the lag
bolt please attach the bubble level on the wall plate to check
whether it is level.
Use 3/8" diameter drill bit to drill 4 holes
at marked positions to a depth of 2.5".
3/8"
To avoid potential personal injury or property damage:
1. Make sure the
logo
on the wall plate is upward as the picture shows.
2.
Solid
concrete wall's thickness should be more than 100mm/4", and the wall must be
capable of supporting five times the weight of the TV plus the mount.
3. All anchors/lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Concrete wall
Option 2 Wall plate installation on concrete wall
①
②
③
CAUTION
④
UP