Step 4
Step 5
Two people are recommended to hold and
position the TV. And cables are recommended
to plug in before hanging the TV.
Hang the TV on the wall plate:
Please pre-tighten the tilting bolts before hanging the TV on the
wall plate ( figure 1).
Hang the top hooks of the brackets over the top bar of the wall
mount. Make sure the hooks securely lock in the bar ( figure 2).
Then attach the lower ends of the brackets to the lower bar of
the wall mount. Pull down straps to lock the brackets in the bar
(figure 3).
Adjust the tilting angles (from
+0°
to
-8°):
Hold and pull TV to your desired angle. If the TV can not hold in
the position please tighten the tilting bolts with Allen key .
⑧
figure 1
figure 2
figure 3
+0°
-8°
Tips: If your TV VESA is less than 600mm / 24in in width, this slilding stopper is useful
to stop brackets slide side to side.
Tilting bolt
Tilting bolt