Then place wall plate along the
centerlines and use pencil to mark
6 hole locations on the wall.
Use 7/32" diameter drill bit to
drill 6 pilot holes at marked
positions to a depth of 2.5".
Put 6 lag bolts through the washers
into the drilled holes, and tighten each bolt
by using a socket wrench to mount the wall
plate securely.
Before totally tightening the
lag bolt please attach the bubble level on
the wall plate to check whether it is level.
(7/32")
32" wood
stud Six
holes on
three
studs
To avoid potential personal injury or property damage:
1. Make sure the
logo
on the wall plate is upward as the picture shows.
2.
Solid
concrete wall's thickness should be more than 100mm/4", and the wall must be
capable of supporting five times the weight of the TV plus the mount.
3. All anchors/lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Concrete wall
Option 2 Wall plate installation on concrete wall
①
CAUTION
Level the wall plate and use wall plate as a
template and pencil to mark 6 hole locations
on your desired height of the wall.
Make sure the logo on wall plate is upward
②
③
③
④
⑤
Use 3/8" diameter drill bit to drill 6 holes
at marked positions to a depth of 2.5".
Put 6 Concrete Wall Anchors (not included in the package)
into drilled holes, and tap each anchor flush with the wall
by using a hammer. Then put 6 lag bolts through the
washers into the anchors, and tighten each bolt by
using a socket wrench to mount the wall plate securely.
Before totally tightening the lag bolt please attach the
bubble level on the wall plate to check whether it is level.
④
