drywall with
wood stud
The wall plate fits for 16", 24", 32" wood stud spacing, please choose corresponding holes in the wall plate for installation.
Step 2 Wall plate installation
:
Option 1 Wall plate installation in wood stud
To avoid potential body injury or property damage:
1. Wall mount must be installed into wood stud's center, not drywall alone.
2. Drywall covering the wood stud must not exceed 16 mm (5/8 in.).
3. Minimum wood stud size: common 2 x 4 in(51 x 102 mm). Nominal 1 1/2 x 3 1/2 in(38 x 89mm)
4. The wall must be capable of supporting five times the weight of TV plus mount.
5. Make sure the logo on wall plate is upward as picture shows.
6. All lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Failure to follow this instruction will possibly lead to TV falling off from wall, and would possibly
cause body injuries or property loss.
CAUTION
<16 mm(5/8 in.)
Locate the stud
with stud finder. Make
marks at the edges
of stud.
Mark centerlines
of stud.
②
①
Then place wall plate along the
centerlines and use pencil to mark
4 hole locations on the wall.
Use 7/32" diameter drill bit to
drill 4 pilot holes at marked
positions to a depth of 2.5".
Put 4 lag bolts through the washers
into the drilled holes, and tighten each bolt by
using a socket wrench to omunt the wall plate
securely. Before totally tightening the lag bolt
please attach the bubble level on the wall plate
to check whether it is level.
(7/32")
24" wood
stud Center
and side
holes on
two studs
UP
16" wood
stud Center
four holes
on two
studs
Then place wall plate along the
centerlines and use pencil to mark
4 hole locations on the wall.
Use 7/32" diameter drill bit to
drill 4 pilot holes at marked
positions to a depth of 2.5".
Put 4 lag bolts through the washers
into the drilled holes, and tighten each bolt by
using a socket wrench to mount the wall plate
securely. Before totally tightening the lag bolt
please attach the bubble level on the wall
plate to check whether it is level.
7/32"
UP
③
④
⑤
③
④
⑤
③
