HOW TO GET MOWING
Your Mountfield lawnmower does not contain petrol or oil and these must be added before use.
Running
the mower with insufficient oil can cause serious damage to the engine and will invalidate your
warranty
.
NEVER TIP THE MOWER ONTO ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL.
To access the underside of the machine lift the front wheels by lowering the handle to the ground.
Carefully remove the mower from the carton and read these Operating Instructions. An Owner’s Manual
for the engine is also included, please read this before starting the engine.
HANDLE ASSEMBLY
t
Move the handle’s lower part, already preassembled, to the working position, making sure the two nuts are correctly
inserted in the openings on the two side chassis supports (Figure 1-A).
t
Move the handle’s grip to the desired height and block the lower clamps (Figure 1-B).
t
Attach the upper part and tighten the handle’s two parts with the upper clamps (5) (previously removed from
their holes). The washers on the handles must be mounted so they keep the top part firmly fixed to the lower section
of the handle, without too much effort required to tighten or release them. (Figure 1-C).
t
Engage the Operator Presence Control (OPC) lever to release the engine brake. Pull the starter cord and fit
it into the cord guide. Fit the cord guide to the upper handle using a 10mm spanner (Figure 1-D).
t
Use cable ties to fit the OPC cable (and clutch cable if fitted) to the handle assembly.
GRASS COLLECTOR
t
Turn the top upside down and fit the frame to it as shown using the screws and washers supplied.
t
Fit the cloth base by fastening the plastic bars onto the frame, it may help to use a screwdriver as shown in the
drawing to do this. Then click the edge into the groove in the top starting 5-7mm from an end (Figure2).
t
To fit the grass collector onto the mower, lift the rear safety deflector flap and hook the collector onto the pegs.
Figure 1-A
Figure 1-D
Figure 1-B
10
10
Figure 2
Figure 1-C
16
16
5-7 mm
Содержание SP535
Страница 2: ......