Mountfield SP535 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 20

Mountfield SP535 Скачать руководство пользователя страница 12

reliable service if operated in accordance with these instructions.

Please read and understand these

Operating Instructions before using your mower, failure to do so could result in personal injury
or damage to the equipment.

NEVER TIP THE MOWER ON ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL.
To access the underside, lift the front wheels by lowering the handle until it rests on the ground.

SAFETY PRECAUTIONS

Your lawnmower should be used with due care and attention. Symbols have therefore been placed on various
parts of the machine to remind you of the main precautions to be taken. Their meaning is explained below. You are
also asked to carefully read the safety regulations in the applicable chapter of this handbook.

1. Warning:

Read the instruction manual before using the

machine.

2. Beware of thrown objects:

Keep other people at a

safe distance whilst working.

3.Warning:

Disconnect the spark plug cap before carrying

out any repairs or maintenance.

4. Beware of cutting:

Moving blades. Do not put hands

or feet near the blades.

DESCRIPTION OF SYMBOLS ON CONTROLS

5.

Slow

6.

Fast

7.

Choke

8.

Engine stop

9.

Drive on

Maximum noise and vibration levels

Operator ear noise pressure level

(according to regulation 81/1051/EEC)........................................ db(A) 82,7

- Measurement uncertainty (2006/42/EC - EN 27574)...................db(A) 0,3

____________________________________________________________

Measured acoustic output level

(according to directive 2000/14/EC, 2005/88/EC)........................ db(A) 96,6

- Measurement uncertainty (2006/42/EC - EN 27574)................... db(A) 0,3

____________________________________________________________

Guaranted acoustic output level

(according to directive 2000/14/EC, 2005/88/EC)........................ db(A) 98

____________________________________________________________

Vibration level (according to the standard EN 1033)................... m/s

2

6,54

- Measurement uncertainty (2006/42/EC - EN 12096)................. m/s

2

0,8

12

5.

6.

7.

8.

9.

«
...
10
11
12
13
14
...
»

Содержание SP535





















Отзывы:

Нет отзывов