HANDLE ASSEMBLY
•
Lift the lower handle into the working position. Secure it using the nuts and bolts supplied (Figure 1A). The
handle can be adjisted in two different position (Figure 1B).
•
•
Secure the OPC and throttle cable to the handle by the clamps provided (Figure 3). Take care that the cables
will not impair removal of the grass collector.
GRASS COLLECTOR
•
16
•
To fit the grass collector onto the mower, lift the
rear safety deflector flap and hook the collector
onto the pegs
•
HOW TO GET MOWING
Your Mountfield lawnmower does not contain petrol or oil and these must be added before use.
Running the mower with insufficient oil can cause serious damage to the engine and will invalidate your
warranty.
NEVER TIP THE MOWER ONTO ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL.
To access the underside of the machine lift the front wheels by lowering the handle to the ground.
Carefully remove the mower from the carton and read these Operating Instructions. An Owner’s Manual for the
engine is also included. Please read this before starting the engine.
WARNING - Unpacking and completing the assembly should be done on a flat and stable surface,
with enough space for machine handling and its packaging, always making use of suitable equip-
ment. Disposal of the packaging should be done in accordance with the local regulations in force.
Fit the top handle using the bolts provided, in paying attention that the throttle cable is placed on the left side
(Figure 2).
Engage the Operator Presence Control (OPC) lever by pulling and holding it against the handle to release the
engine brake. Pull the starter cord and fit it into the cord guide as shown (Figure 4). Fit the cord guide on the up-
per handle using a 10 mm spanner.
•
Lift the rear safety deflector flap and assembly the plastic pin as shown in Figure 5.
Figure 1A
Figure 1B
Figure 2
Figure 4
Figure 3
Figure 5
Figure 6
Fit the cloth base by fastening the plastic bars onto the frame. It may help to use a screwdriver as shown in the
drawing. Hook the handle. (figure 6)
Содержание SP533
Страница 2: ......