Mountfield LEVITA BV 2500, Руководство по эксплуатации, Страница: 22 / 36

EN
Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons Unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Use the power tool, accessories and tool bits etc., in accordance with these instructions and in
the manner intended for the particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from
intended could result in a hazardous situation.
Service
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is maintained.
Additional safety rules for blower
•
Always wear adequate protective clothing when operating the tool to avoid injuries to face, eyes, hands,
feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long trousers,
work gloves, a hard hat and ear defenders.
•
Do not start the tool when it is upside down or when it is not in the operating position
•
Switch the motor off and remove the plug when the tool is not being used, left unattended, being
cleaned, being moved from one place to another or when the extension cord is entangled or damaged.
•
Do not operate the tool near people, especially children or pets. Turn it off if they get too close. Maintain
a safe distance of at least 5m from other people when using the tool.
•
Never direct the blower tube towards bystanders or pets. Never blow debris in the direction of
bystanders or pets. The operator is responsible for accidents or hazards occurring to other people or
their property.
•
Do not handle the plug or the tool with wet hands and do not use the tool in the rain.
•
Use only outdoor rated extension leads that are so marked. Keep the extension cord away from heat, oil
and sharp edges.
•
Extension cords shall not be lower quality than H07 RN-F according DIN/VDE 0282 with a minimum
cross section of wire 1,5 mm
2
and a recommended maximum length of 30 m.
•
Ensure that the extension lead is secured in a manner that prevents it form disconnecting from the plug
whilst in use.
•
Keep all the air intakes and the blower tube free of dust, lint, hair and other material that may cause a
reduction in air flow.
•
Keep a balanced and stable stance while using the tool.
•
Do not switch on the tool in enclosed or poorly ventilated spaces or in the presence of inflammable and /
or explosive substance such as liquids, gases and powders.
•
Do not get distracted and always concentrate on what you are doing. Use common sense. Never
operate the tool when you are tired, sick or under the influence of alcohol or other drugs.
•
Do not operate this appliance with long loose hair or loose fitting jewellery. Tie long loose hair back and
remove loose fitting jewellery.
•
Do not allow the blower vac to pick up any burning or smoldering materials like ashes, cigarette butts
etc.
•
Do not attempt to pick up breakable objects like glass, plastics, porcelain, etc.
22