Mountfield 4125M, Инструкция по эксплуатации, Страница: 11 / 20

11
ENGLISH
GB
2/3. Operating position.
4. Start position – the electric start motor
is activated when the key is turned to the
spring-loaded start position. Once the en-
gine has started, let the key return to oper-
ating position 2/3.
7. GEAR LEVER (4125M)
A lever for selecting one of the five forward gears
in the gearbox (1-2-3-4-5), neutral (N) or reverse
(R).
The clutch pedal must be kept pressed in when
changing gear.
NOTE! You must make sure the machine is quite
stationary before changing from reverse to forward
gear or vice versa. If a gear does not engage imme-
diately, release the clutch pedal and then press it in
once again. Engage the gear once again. Never
force a gear in.
8. POWER TAKE-OFF
A lever for engaging and disengaging the power
take-off for operating front-mounted accessories.
Two positions:
1. Lever in forward position – power take-
off disengaged.
2. Lever in backward position - power
take-off engaged.
9. DISENGAGING LEVER (4155H)
A lever for disengaging the variable transmission.
Enables the machine to be moved by hand without
the help of the engine. Two positions:
1. Lever moved back – transmis-
sion engaged for normal opera-
tion.
2. Lever moved forward – trans-
mission disengaged. The ma-
chine can be moved by hand.
The machine may not be towed over long distances
or at high speeds. The transmission could be dam-
aged.
AREAS OF USE
The maximum vertical load on the towing hitch
must not exceed 100 N.
The maximum over-run load on the towing hitch
from towed accessories must not exceed 500 N.
NOTE! This machine is not intended to be driven
on public roads.
STARTING AND OPERATION
ENGINE CASING
To fill with fuel and to inspect and maintain the en-
gine and battery, open the engine casing.
The en-
gine must not be running when the casing is
opened.
Opening:
1. Raise the seat lock (fig. 4) and fold the seat for-
wards.
2. Pull up the rubber strap at the front edge of the
casing (fig. 5).
3. Grasp the front edge of the engine casing and
fold up the casing (fig. 6).
Closing:
1. Grasp the front edge of the engine casing and
fold down the casing (fig. 6).
2. Secure the front edge of the casing with the rub-
ber strap (fig. 5).
The machine may not be operated un-
less the engine casing is folded down.
Risk of burns and crushing injuries.
FILLING THE FUEL TANK
Open the engine casing as above. Unscrew the fill-
er cap and fill with clean, lead-free petrol. You
must never use 2-stroke petrol mixed with oil (fig.
7).
NOTE! Bear in mind that ordinary lead-free petrol
is a perishable; do not purchase more petrol than
can be used within thirty days.
Environmental petrol can be used, i.e. alkylate pet-
rol. This type of petrol has a composition that is
less harmful for people and nature.