Mountfield 3SAU0057, Инструкция по установке и эксплуатации

Страница: 12 / 28

12
E. Install THE BENCH, THE HEATER PLATE FOR
THE BENCH AND THE CABLE CONNECTIONS
1. Fit the longer plate with the heaters for the bench by
aligning its sides with the vertical guides in each side
plate. The grille of the heater faces outwards (towards
the sauna front). Press the heater plate for the bench
along its route in the downward direction until it safely
contacts the BOTTOM PLATE.
1. Connection the bench heater connector into the inlet
in the plate.
1. Fit the shorter plate with the heaters for the bench by
aligning its sides with the vertical guides of the side
plate with heaters for the bench.
1. Connection the bench heater connector into the inlet
in the plate
1. Install the bench plates by shifting them along their
horizontal guides in the side plates.
Press the benches in along their route until they contact
the rear plates.