Mountain Trike MT3.001.0001, Руководство пользователя

Страница: 19 / 37

Mountain Trike Owner’s Manual Issue 2
19
Your Mountain Trike dealer can advise you on recommended modes of transfer, however, the
method and the approach taken is down to the individual. Please take a moment to determine
the best method for you.
2.3 How to Engage / Disengage Drive
When transferring, it is best to have the drive levers disengaged, laid down in the back position
and the parking brake is applied to prevent any unexpected movement. To disengage the drive,
pull out the engagement handle and twist 90 degrees to lock it in its disengaged position. Once
you have transferred and are happy in the Mountain Trike, it is time to engage the drive levers
and release the parking brake, ready to propel the Trike.
Each drive lever engages separately. When disengaged, the drive levers are totally decoupled
from the drive system and the levers and are free to move until they hit their end stops. Similarly,
the wheels are free to roll if unobstructed. To engage the drive, keep the parking brake on, and
engage one lever at a time. Do not release the parking brake until drive is engaged and you are
ready to ride off.
Take up the left lever, and with the lever positioned slightly forward of upright centre, twist the
engagement handle and push the drive lever forwards until the Engagement Handle springs
downwards and the pin seats into one of the holes in the Drive Ring. The left drive lever should
now stay up and ready, leaning slightly forward. Repeat for the right hand side. The drive levers
are now engaged and ready to use. Ensure the Engagement Handle is fully down and securely
engaged before proceeding.
Once drive is engaged, release the parking brakes on both sides and the Trike is free to be
propelled by the rider.
DRIVE RING