Mountain Trike MT push, Руководство пользователя

Страница: 9 / 28

MT push - Owner’s Manual Issue 1
9
Folding the Push Handle
Remove the push handle from the clamp by undoing the Quick Release lever. Slide the push
handle up and out of the clamp and taking care not to overstretch the brake hoses, locate the
handle under the loop on the back of the seat.
To refit the handle, slide it out from the seat back and slot in into the Clamp at the desired height.
Ensure the handle is straight before tightening the Quick Release (QR) lever. (See instructions
below for QR details)
Folding the Rear Wheel
Like the seat, the rear wheel can also be folded away. This is done by simply releasing the rear
shock absorber from the rear swingarm as shown below. Once folded, the rear wheel can be held
in place with a Velcro strap underneath the seat base.
Using the Quick Release (QR) Lever, located at the connection between the rear shock absorber
and the rear swingarm, the rear shock absorber can be separated from the Rear Swing Arm,
allowing the rear wheel and swing arm to fold underneath the seat. QR levers are designed such
that reasonable hand/finger strength is sufficient to provide the required compression force upon
flipping the lever closed. If the lever flips with little or no resistance, then the adjusting nut will
need tightening until the lever flips with enough resistance to provide adequate compression.