Mountain Trike MT push, Руководство пользователя

Страница: 12 / 28

MT push - Owner’s Manual Issue 1
12
2.0 Riding Instructions
The MT push control systems are designed to be simple to use, intuitive and give the rider
unsurpassed levels of ride comfort. However, it may take a few moments to become familiar with
the controls upon your first try.
Please choose a smooth and level piece of ground that is clear of obstructions and contains
sufficient space when riding your MT push for the first time.
Areas that contain rough or steep terrain, open water, manoeuvring vehicles or large amounts of
pedestrian traffic are not recommended.
Apply the parking brakes during transfer into the MT push. Release the parking brakes when the
rider is ready to go and push the push handle to go forwards.
To steer the MT push apply sideways motion to the push handle to initiate a turn. You may wish
to apply the brake on the inside wheel to help make a tight turn. E.g. apply right Brake to help
initiate a tight right turn.
The pusher must look ahead to anticipate obstacles and pick the best route over the terrain.
Some larger obstacles such as kerbs may be better tackled in reverse by lifting the rear wheel up
onto the ledge, then pulling the Trike up next.
2.1 Pre-Ride Mechanical Safety Checks
Before riding your MT push, it is imperative that you make the appropriate safety checks to
ensure that the MT push is fit to ride.
•
Make sure the rear shock absorber QR lever is located correctly and is tight.
•
Check both locking pins on the seat back are engaged and the seat is not free to swing or
fold.
•
Ensure that footrest locking pins are correctly engaged so that it is not free to move.
•
Set the push handle at the required height and ensure the QR lever is tight so the handle is
secure.
Make a thorough visual inspection for damaged parts or any areas that show excessive wear or
exhibit unintended movement or looseness.
•
Check all of the bolts that connect the parts of the MT push together. For advice on
tightening bolts see maintenance Section 3: ‘Service’.