Find the acrylic piece labeled “B”. This is the front of the case. On one side protective film will need to
be removed. The other side will already have the film removed and the name “Bob Slay” as well as the
Mountain Mods logo etched onto it.
After removing the film from parts A and B take a left sided acrylic block and fasten it to part A.
Each block has 3 inserts for mounting hardware. Take Part B and align it to the bottom front edge of
Part A to see how you will need to mount the block. Do the same with the right side of the bottom of the
case with a right sided acrylic block. Below is a picture of parts A and B attached in this manner.
