4
3.
Glue the fuselage bottom and fuselage bottom sides in place, as shown below, after making sure all the parts are
fully inserted into each other.
4.
Glue the vertical fins in place, at a 60 degree angle to the wing top. (See the right image above) Hold them in
place with tape, until the glue is cured. (Newer kits have angle gauges included)
5.
Assemble the motor mount, as shown below. Glue the joints with thin CA. Be careful not to glue it to the table or
your fingers!
6.
Mount the aluminum motor mount that came with your motor to the firewall with small #2 screws. Make sure you
get it centered on the plywood motor mount. Glue the plywood motor mount in place on the fuselage, as shown
below.
