2
Thank you for purchasing the Mountain Models Fighter 22 Cul-De-Sac Flyer. The Fighter 22 is a super
lightweight, highly aerobatic Depron foam jet. Standard aerobatics, rolling circles, and falling leafs are no
problem for this nimble jet. High quality laser cut Depron and plywood parts make the assembly of this laser
cut model airplane kit a breeze!
We think you’ll find this jet to be a lot of fun, being able to be flown in small outdoor spaces and indoor
gymnasiums.
Thank you,
Brian Eberwein
Mountain Models
PO Box 9557
Colorado Springs, CO 80932
www.mountainmodels.com
Phone: 719.630.3186
Parts List
Number in Kit
Description of Part
Foam Parts
9
3mm Depron Parts
3
6mm Depron Parts
1
0.032” x 18” Wire
1
0.019” x 0.118” x 16” Carbon Spar
Bagged Parts
1
1/16” Plywood Motor Mount
4
1/32” Plywood Motor Mount Parts
2
1/32” Plywood Control Horns
4 Motor
Mount
Screws
Electronics You Will Need
•
1 ea. 10 gram, 2000 KV Outrunner
•
1 ea. GWS 5x3 3-Blade Prop
•
2S-300 LiPo
•
1 ea. 6 Amp Brushless ESC
•
2 ea. 3.7 to 4 gram servos
•
1 ea. Lightweight (Berg4L, or similar) 4-channel RX
•
1 ea. 4 channel radio minimum (Elevon mixing capability recommended)
Building Materials You Will Need
•
Smooth and flat work surface
•
Wax paper or clear plastic wrap to protect the work surface
•
Foam safe Cyanoacrylate (CA) glue and accelerator
•
Hobby knife with #11 blades
•
Needle nose pliers
•
Wire cutters
•
Screwdrivers
•
Sanding block, 320 grit sandpaper
