2
3
Insert front legs into openings
underneath seat.
Attach front strut to front seat
tubing and close lock.
Check the legs lock in place.
3.
2.
a. Insert rear left leg assembly
(LRL) into chassis opening.
and attach to rear left leg assembly.
Check that right hand leg height is
adjusted so that it is the same length
as the left leg (3 adjustment
holes in the aluminium tube should
be visible). To adjust, pull lock to the
left and turn down.
Slot footbrake into left and right wheel
axles.
b. Check the pop-up button locks
into place.
Attach Rear Right Wheel (RWR )
to right leg assembly.
Remove right wheel from right leg...
Final Rear assembly should look like this.
Loop the wrist strap around the handle
bar and back through itself. Always use
the wrist strap. Ensure that the handlebar
does not slip out of your hands.
8. AttACh front leg
Assembly
4.
5.
6.
7.
1. AttACh left leg
Assembly
10.
9.
11.
For swivel action, leave lock upright.
For locked wheel, press lock down with
wheel facing forward.
Attach front wheel to front wheel
assembly.
