Page 6
M-1100i Digital Game Camera
Page 15
M-1100i Digital Game Camera
CAPTURE MODES
III
You will see one of three status screen displays after you slide the IRAIM/OFF/ON switch to the ON
position. After 30 seconds the camera will enter sleep mode and wake up when motion is detected.
Motion Detect Mode
When the camera has been programmed for Motion Detect
Mode - Photo, the camera will take still images when motion is
detected. The following will be displayed on the Status Screen.
CURRENT OPTIONS
PHOTO/VIDEO:
Photo
DELAY:
1 min
MULTI-SHOT:
1 (OFF)
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
CURRENT OPTIONS
INTERVAL:
1 min.
PROGRAM 1:
6am-10am
PROGRAM 2:
4pm-8pm
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
CURRENT OPTIONS
(press ^ v to adjust and review
options for MOTION DETECT and
TIMELAPSE)
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
(press
▼▲
to change Mode)
GENERAL SETTINGS
<OPTIONS OPTIONS>
MOTION DETECT ACTIVE
PHOTO Delay 00:00
(press
OK
to take test photo)
(press
OK
to take test photo)
(press
▼▲
to change Mode)
MOTION DETECT
<OPTIONS START>
(press
▼▲
to change Mode)
TIMELAPSE
<OPTIONS START>
(press
OK
to take test photo)
(press
▼▲
to change Mode)
TIM MOTION DETECT
START>
TIMELAPSE ACTIVE
T.L. Countdown: 00:00:00
TIM MOTION ACTIVE
MENU START SCREENS
MENU STATUS SCREENS
Time Lapse
When the camera has been programmed for Time Lapse
photography, the camera will observe a full day of activity in
the field during Time Lapse mode. The camera will record a
block of still images following the Time Lapse program setting.
The following will be displayed on the Status Screen.
NOTE: See “Setting Time Lapse Features” for more
information about settings for time lapse mode.
Time Lapse + Motion
The camera operates in Time Lapse Mode during the
programmed intervals and Motion Detect Mode for the
remainder of the day.
CURRENT OPTIONS
PHOTO/VIDEO:
Photo
DELAY:
1 min
MULTI-SHOT:
1 (OFF)
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
CURRENT OPTIONS
INTERVAL:
1 min.
PROGRAM 1:
6am-10am
PROGRAM 2:
4pm-8pm
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
CURRENT OPTIONS
(press ^ v to adjust and review
options for MOTION DETECT and
TIMELAPSE)
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
(press
▼▲
to change Mode)
GENERAL SETTINGS
<OPTIONS OPTIONS>
MOTION DETECT ACTIVE
PHOTO Delay 00:00
(press
OK
to take test photo)
(press
OK
to take test photo)
(press
▼▲
to change Mode)
MOTION DETECT
<OPTIONS START>
(press
▼▲
to change Mode)
TIMELAPSE
<OPTIONS START>
(press
OK
to take test photo)
(press
▼▲
to change Mode)
TIM MOTION DETECT
START>
TIMELAPSE ACTIVE
T.L. Countdown: 00:00:00
TIM MOTION ACTIVE
MENU START SCREENS
MENU STATUS SCREENS
CURRENT OPTIONS
PHOTO/VIDEO:
Photo
DELAY:
1 min
MULTI-SHOT:
1 (OFF)
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
CURRENT OPTIONS
INTERVAL:
1 min.
PROGRAM 1:
6am-10am
PROGRAM 2:
4pm-8pm
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
CURRENT OPTIONS
(press ^ v to adjust and review
options for MOTION DETECT and
TIMELAPSE)
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
(press
▼▲
to change Mode)
GENERAL SETTINGS
<OPTIONS OPTIONS>
MOTION DETECT ACTIVE
PHOTO Delay 00:00
(press
OK
to take test photo)
(press
OK
to take test photo)
(press
▼▲
to change Mode)
MOTION DETECT
<OPTIONS START>
(press
▼▲
to change Mode)
TIMELAPSE
<OPTIONS START>
(press
OK
to take test photo)
(press
▼▲
to change Mode)
TIM MOTION DETECT
START>
TIMELAPSE ACTIVE
T.L. Countdown: 00:00:00
TIM MOTION ACTIVE
MENU START SCREENS
MENU STATUS SCREENS
When the camera’s power is turned ON, the display will
come on to the Default Screen. Moving from top to bottom,
information is displayed for capture type, delay countdown
for capture, battery level with remaining days left, and image
count/remaining capacity. If no buttons are pressed within
30 seconds, the LCD screen will enter sleep mode to conserve
battery life and enter capture mode based on current settings.
To wake the camera manually, press and hold the Menu
button until you see the default screen on the display.
SETUP AND PROGRAMMING
IV
CURRENT OPTIONS
PHOTO/VIDEO:
Photo
DELAY:
1 min
MULTI-SHOT:
1 (OFF)
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
CURRENT OPTIONS
INTERVAL:
1 min.
PROGRAM 1:
6am-10am
PROGRAM 2:
4pm-8pm
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
CURRENT OPTIONS
(press ^ v to adjust and review
options for MOTION DETECT and
TIMELAPSE)
Battery:
75%
Estimated Days:
15 Days
Taken / Remaining:
0000 / 9999
(press
▼▲
to change Mode)
GENERAL SETTINGS
<OPTIONS OPTIONS>
MOTION DETECT ACTIVE
PHOTO Delay 00:00
(press
OK
to take test photo)
(press
OK
to take test photo)
(press
▼▲
to change Mode)
MOTION DETECT
<OPTIONS START>
(press
▼▲
to change Mode)
TIMELAPSE
<OPTIONS START>
(press
OK
to take test photo)
(press
▼▲
to change Mode)
TIM MOTION DETECT
START>
TIMELAPSE ACTIVE
T.L. Countdown: 00:00:00
TIM MOTION ACTIVE
MENU START SCREENS
MENU STATUS SCREENS
There are a number of ways for you download and view
the pictures, videos in the field or at another location.
Removing the SD Card
To remove the SD Memory Card, open the camera cover
and push gently on the SD card and it will pop out slightly
allowing you to remove it. Load the SD card into the
player or card reader to view or move stored images to
another location.
Important
Make sure that the camera is in the OFF position before
removing SD card.
ln the Field
You can download the pictures, videos, and time lapse
pictures with the aid of external devices. To download,
use an external player or card reader that is
supported by 12V DC or Mini USB Jack.
At Home
Remove the entire camera and transport to another location to download images. To connect the
camera to a PC computer, turn the camera ON, press the MENU button once to change to SETUP
Mode. Connect the USB cord (not included) between the USB out port and the PC computer. The
computer will recognize the camera as a removable drive. The unit works with Windows XP/Vista/7 or
Mac OS X 10.1 or higher. Copy the images and videos from the camera onto your PC for further
editing or printing. When the USB cable is disconnected, the camera will go back to SETUP mode.
VIEWING YOUR IMAGES
VII
See the full line of Moultrie camera accessories at www.moultriefeeders.com
