8
BEFORE USING FOR THE FIRST TIME
• Place your coffee maker on a flat,
stable, heat-resistant surface away
from water splashes and any sources of
heat.
• Plug the coffee maker into a power
source with the same voltage as
indicated on the appliance.
• Operate the coffee maker once
without coffee with 0,65 litre of water
to rinse the circuit out.
MAKING COFFEE
(Follow illustrations 1 to 6)
• Fill the water tank with cold water.
• Only use cold water and a No. 4
paper filter.
• Never exceed the maximum amount
of water shown by the tank
graduations.
• Be sure to close the cover on the filter
holder before switching on the coffee
maker (as hot water may run out onto
the work surface).
• Place the jug onto the hot plate.
Operation:
• Push the switch down, the red light
comes on and the coffee maker starts
to operate.
• Push the switch up to switch off the
coffee maker.
• If you want to serve a cup of coffee
before the end of the cycle, simply
remove the jug from the hot plate. The
coffee will stop flowing automatically.
Return the jug to the plate quickly so
that the coffee may continue flowing.
• At the end of a cycle, wait for around
one minute until the water in the filter
stops
flowing
into
the
jug.
We
recommend leaving the lid on the jug
so that it is easier to use and so that the
coffee stays at the right temperature
for longer.
• Switch off when the jug is empty or
when the appliance is not in use.
• If you want to prepare another coffee,
switch off the appliance and wait for 10
minutes so that the heating elements
can cool down.
Important: if you do not let the appliance
cool down between two uses, the water
in the water compartment may overheat
and a jet of steam may be emitted when
it is opened, which could cause scalding.
Operation:
• Push the switch down, the red light
comes on and the coffee maker starts
to operate.
• Push the switch up to switch
off the coffee maker.
cafetie?re lumen noveo 30 11 2009.qxd:ROBOR BAGUIO 30/11/09 14:55 Page 8