Moulinex FRUTELIA JU450G10, Руководство пользователя

Страница: 9 / 59

5
BEFORE FIRST USE
USING THE APPLIANCE
• We recommend that you wash all the removable parts ( A , B , C , D , E , G , L , M ) in
warm soapy water (see paragraph ”Cleaning”). rinse and dry them carefully.
• Unpack the appliance and place it on a solid, stable work surface.
• ensure that all packaging has been removed before starting the appliance.
• Place the juice collector (
E
) on the body of the appliance (see
Fig. 1
).
• Place the sieve (
D
) in the juice collector (
E
). Ensure that the sieve is properly
clipped onto the drive shaft (
J
). You can hear an audible click when the
sieve is positioned correctly (see
Fig. 2
).
• Fit the pulp collector ( G ) on the rear of the appliance (see Fig. 3 ).
• Fit the cover (
C
) on the appliance, spout to the rear (see
Fig. 4
).
• Push the safety clamp (
H
) to the rear until it locks into place. You will hear an
audible “
click
” (see
Fig. 5
).
• slide the pusher ( A ) into the feed tube ( B ) aligning the groove on the pusher
with the small ridge in the feed tube.
• the juice jug cover (
L
) has a foam separator that keeps the foam in the jug
(
M
) when you pour the juice into a glass. If you do not want to separate the
foam, remove the cover.
• Place the juice jug (
M
) under the pouring spout in front of the appliance
(see
Fig. 6
).
• Plug in the appliance.
• to start the appliance, use the control switch (
I
).
• Insert the fruits or vegetables through the feed tube (
B
).
• the fruits and vegetables must be inserted only while the motor is running.
• Do not press too hard on the pusher (
A
). Do not use any other utensil. NeVer
push with your fingers.
• When you have finished, stop the appliance by turning the control switch (
I
)
to 0 and wait until the sieve (
D
) stops completely.
• When the pulp collector ( G ) is full, or the juice flow slows down, empty the
pulp collector and clean the sieve and the cover.
• remove the “juice col filter” assembly by pulling vertically using
both hands (see
Fig. 7 and 8
).