Applicable EC Directives:
2006/42/EC
EC Machinery Directive
Applicable harmonized standards, in particular:
DIN EN ISO 12100 to
1.2
Safety of machinery, devices and equipment
Januar 2016
MOULDPRO APS
BALTORPBAKKEN10
DK-2750 BALLERUP
DENMARK
TEL: +457020 3131
MAIL: [email protected]
Introduction
This instruction manual contains all instructions necessary for the proper use, operation, and
maintenance of this crimping tool, and for the procurement of spare parts.
Please read these operating instructions carefully before using the equipment. By doing so, you will
avoid problems with the unit and prevent damage that might be caused by incorrect operation.
The manufacturer will not be responsible for damage caused by failure to comply with the operating
instructions.
The operation of the crimping tool can be dangerous. It is, therefore, important that only trained,
experienced personnel be allowed to operate it. Persons under 18 are not allowed use it. However, it
is permissible to allow people above the age of 16 to work with the tool if it is necessary to achieve
training objectives and if there is supervision by a qualified person.
