ENGLISH
7
6 - SAFETY INSTRUCTIONS
- Avoid using the pump in rooms where there are liquids, gases, flammable powders or with risk of
explosion.
- Before plugging in the pump to the outlet, make sure the switch is off.
- The outlet must be suitable for the plug of the pump. Do not use non CE-marked defective outlets.
- Use (CE) approved extensions, only if necessary.
- Do not use plug adapter. Do not carry out any modifications to the plug nor to the electrical cable.
- Pump shall always kept in perfect efficiency.
- During maintenance operations, check the switch is off and the plug is not connected.
- All maintenance operations must be carried out by the authorized Technical Assistance Service.
- Only use MOULDPRO original spare parts.
- Do not carry out any modifications to the pump if not authorized by MOULDPRO Technical
Department (ask for written authorization).
- Keep children and unauthorized persons away from the pump.
- Keep the pump out of reach of children and unauthorized persons.
- Do not use the pump if tired or under the effect of alcohol, medicines or drugs.
- When using the pump, wear overalls, do not wear jewellery, keep hair away from the pump.
- When handling descaling liquids, be very careful. It is necessary to use Individual Protection
Equipment (IPE).
7 - CHEMICALS
Copper
Steel
Stainless Aluminium
Brass
Tin
Light
Galvanised
steel
alloys
iron
DESCALING CHEMICALS
REMOVER LIQUID
•
•
Concentrated descaling liquid
with powerful reaction for
systems and heat exchangers.
REMOVER PLUS LIQUID
•
•
Concentrated descaling liquid
(non-fuming), with degreasing
action, for systems and heat
exchangers.
REMOVER PLUS POWDER
•
•
•
•
•
Concentrated descaling powder
(non-corrosive, non-fuming) for
systems and heat exchangers.
NEUTRALIZING CHEMICALS
NEUTRALIZER
•
•
•
•
•
•
•
•
Neutralizing powder to remove
residual acidity after descaling
systems and heat exchangers.
Also suitable for neutralizing
descaling chemicals after use,
thus making it possible to
drain them.
