background image

SAFEGUARDING YOUR  SECURITY

www.mottura.it 

99348ENG - 09/20 - a_023399

REPLACING THE OUTPUT FUSE: The transformer is protected in output by a fuse. An integral fuse is indicated by the “MAINS/RETE” LED on 
the front panel; if the LED is off with power switched on, the fuse is blown.

Remove the terminal cover from the 12 VDC OUTPUT side by inserting a small flat-blade screwdriver a few millimeters into the center hou-
sing on the cover, then gently tilt it from the other side of the box until the fastening tab is released. Remove the screwdriver and gently 
slide off the terminal cover with your hands.
Remove the plastic cover of the fuse holder, remove and replace the fuse with one with the same rating (see technical data, paragraph 7.3). 
Reposition the terminal cover before switching voltage back on.

Before replacing the fuse, switch off the 230 VAC mains power supply and take all possible precautions to avoid electrical 
shock.

7.3 - TECHNICAL DATA

INPUT POWER SUPPLY 

VOLTAGE / FREQUENCY 

230 VAC / 50-60Hz 

MAX. CURRENT DRAW 

< 0,105 A 

MAX. POWER 

24 VA 

PROTECTION RATING 

IP10 (with terminal covers on) 

WORK TEMPERATURE 

Min -10 °C ÷ Max.+40 °C 

ENCAPSULATED TRANSFORMER 

PROTECTION 

T 0.125 A 

MECHANICAL 

WEIGHT 

0.7 Kg 

DIMENSIONS 

142 x 110 x 62 mm 

MATERIAL 

Blend PC/ABS self-extinguishing UL94-V0 

OUTPUT 

VOLTAGE 

12 VDC non-stabilized 

IMPULSE ABSORPTION 

( 5 sec. max)

2 A 

FUSE  

DELAYED ACTION T 3.15 A (5 x 20) mm 

TERMINAL BOARD

RATED SECTION OF CABLES 

0.5mm

2

 (AWG20) to 2 mm

2

 (AWG12)

Pursuant to article 26 of Italian Legislative Decree no. 49 of 14 March 2014 “Implementation of EU Directive 2012/19 concerning 
waste electrical and electronic equipment (WEEE)” and article 9 of Italian Legislative Decree no. 188 of 20 November 2008 “Imple-
mentation of EC Directive 2006/66 on batteries and accumulators and waste batteries and accumulators” adequate waste sorting for 
subsequent sending of disposed equipment to recycling, treatment and environmentally compatible disposal contributes to avoiding 
possible negative effects on the environment and human health and promotes reuse and/or recycling of the materials composing 
the equipment. Unlawful disposal of the product by the user may result in the application of penalties pursuant to current laws and 
regulations on the matter. We remind that batteries and power adapters, if present, must be removed before the device is disposed. 
Batteries and adapters must be collected and separately disposed.

Содержание XMODE

















Отзывы: