Mottura XDIGIT 99.779, Быстрый старт

Страница: 7 / 12

7
1 2
1 2A 2B
X
2
x2 already stored as
MASTER.
x3 already stored as
SERVICE.
x4 Memory full
During this step the CODE or
TAG will become master
Press any button to activate the unit.
Then press E.
Show TAG or digit a CODE 3 to 8 digits,
press button P to confirm. Digit again
the same CODE or show the same TAG
and press P.
NO CREDENTIAL ARE STORED THE FIRST TIME YOU ENTER THE PROGRAMMING
First Programming
If the code is confirmed the
GREEN light will flash.
If the code is NOT confirmed,
the RED light will flash exiting
from programming.
Uscita automatica da programmazione
N.B. From this moment the unit has its first master credential which allows the next access to pro-
gramming, the warning of credential failure disappears and you can open the lock authenticated
with the unit.
Entering service CODE / TAG
! Press any key to activate the unit !
Steady yellow LED
Activate the unit. To enter in program-
ming press E , enter the master code
confirming with E or show a master
TAG.
Digit a code for service and press P , a
double flash YELLOW will indicate to
enter the same code and press P .
Show the unknown TAG to the reader,
the GREEN flash will indicate the cor-
rect procedure.
TO EXIT WAIT FOR TIMEOUT (10 sec.) OR PRESS E 5 TIMES