Zx020_02e_oi_e.doc / Apr-16
Page 5 / 11
2.
Front Key Operation
2.1.
Enter the Setup Mode
There are two different ways to enter the setup mode:
a)
keep both front keys pressed when powering on
b)
keep both front keys pressed for 5 seconds, if the power is already on
2.2.
Parameter Settings
With an activated setup mode, the display shows:
After releasing the keys, the display shows:
In order to cancel the setup hold the left key pressed and additionally press the right one
By pressing the right key, the display changes to:
To jump into the first parameter, hold the left key pressed and additionally press the right one
After releasing the keys, the display alternates between the parameter title and the setting of
the parameter. After pressing any key, only the parameter value for setting is displayed.
Press the right key, to jump into the next parameter.
For numerical inputs select the decade with the left key and change the value by the right one
To jump into the next parameter, hold the left key pressed and additionally press the right one
After reaching the last menu item “Endpro“, two selections can be done:
„Yes“: will store all new entries, before the unit automatically switches to normal operation.
„No“: will repeat the setup routine. The latest values will remain without saving and can be
checked or modified before they are permanently stored.
