Motrona ZU 252, Руководство по эксплуатации

Страница: 23 / 36

ZU25201e_e.doc / Sep-13 Page 23 / 36
Parameter Description
Serial Communication:
Unit
Number:
Especially with RS 485 applications it is necessary to attach a specific address to
each unit, since up to 32 units can be connected to the same bus. You can
choose any address number between 11 and 99.
Factory setting = 11
The address must not contain a “0“ because these numbers are reserved for collective
addressing.
Serial
Baud
Rate:
Setting Baud
0* 9600
1 4800
2 2400
3 1200
4 600
5 19 200
6 38 00
* = Factory setting
Serial
Format:
Setting Data bits Parity Stop bits
0* 7 even 1
1 7 even 2
2 7 odd 1
3 7 odd 2
4 7 none 1
5 7 none 2
6 8 even 1
7 8 odd 1
8 8 none 1
9 8 none 2
* = Factory setting
Serial Protocol: Selects the serial protocol for the cyclic transmission.
0 : the string starts with the serial address of the unit (“Unit
Number”), followed by a space and the value of the register to
be read out. The string ends with a “Line Feed” character and a
“Carriage Return” character.
1 : the unit number is omitted and the string starts with the
register value directly. This allows a little faster transmission
because of the shorter transmission time.
Unit No.
Serial Protocol = 0 : 1 1 +/- X X X X X X LF CR
Serial Protocol = 1 : +/- X X X X X X LF CR