Operating Manual
motrona GmbH, Zeppelinstraße 16, DE - 78244 Gottmadingen, Tel. +49 (0) 7731 9332-0, Fax +49 (0) 7731 9332-30, [email protected], www.motrona.com
LW213 – LW214 (1300 nm) & LW215 – LW216 (850 nm)
Optical fiber modules for transmission of incremental encoder or sensor signals
Product features:
Modules for data transmission of incremental encoder or sensor signals via an optical fiber
Safe and reliably transmission of incremental signals, up to a distance of 3000 meters
Four channels allowing a signal transmission with a sample rate of 10 MHz each
For all incremental RS422, 5V-TTL or 10 to 30 V HTL encoders and sensors
The optical fiber cable can be routed through explosive areas as well
Input / Output data rate of max. 2 Mbit/s (transmitter and receiver)
Resistant against extremely strong electromagnetic fields
Already assembled optical fiber cables are available
Power supply either 5 VDC or 10 to 30 VDC
Available systems (Transmitter and receiver with the same wave length are arbitrarily combinable):
Transmitter (1300 nm)
Transmitter (850 nm)
Output levels:
Power supply
LW213
LW215
RS422
5 VDC (± 5%)
LW213-1
LW215-1
RS422
10 ... 30 VDC
LW213-2
LW215-2
HTL (push-pull / dual channel) *
10 ... 30 VDC
LW213-3
LW215-3
HTL (push-pull / single channel)
10 ... 30 VDC
Receiver (1300 nm)
Receiver (850 nm)
Output levels:
Power supply
LW214
LW216
RS422
5 VDC (± 5%)
LW214-1
LW216-1
RS422
10 ... 30 VDC
LW214-2
LW216-2
HTL (push-pull)
10 ... 30 VDC
*) dual channel transmitter variants cannot be operated as single channel units
