Remote Control Instructions
ONE TOUCH BUTTON
One touch flat position.
HEAD
FOOT
Lifts and
Lowers Head
Lifts and
Lowers Foot
Flat Position
This arrows lift and lower the
head section of the foundation.
This arrows lift and lower the
foot section of the foundation.
ADJUST
Make sure the batteries are good. Replace them
when needed.
STEP 1
：
Unplug the power cord from the power source.
If 9V backup batteries were installed in the
power supply, remove them.
STEP 2
：
HEAD
FOOT
STEP 3
：
Press and hold and simultaneously
until the blue backlights of the remote control
are off.
Pairing Remote
Press And
Hold
Plug the DC power cord back into the power source. You will hear an activation
sound in 2 seconds, indicating the remote is paired to the power foundation.
STEP 4
：
AAA
AAA
AAA
The original remote that comes in the box is already paired to the foundation.
No further action is required. In the event when the remote is not paired with
the foundation, follow the pairing instructions below.
