USB
Charger
Sync Cord
Power Supply
Head Motor
Foot Motor
HD Motor
LED
APP
SYN
FT Motor
USB
Power
DC
Power Cord
AC
Power Cord
WIRELESS RECEIVER
CB11B
Control Box
Electronics Quick Reference Guide
Wireless Syncing Instruction
UN-SYNC Two Foundations
STEP 1
：
Make sure both remotes are individualy paired to
the foundation.
If the remote is not paired with the
foundation, follow the pairing instructions.
STEP 2
：
Make sure both foundations are at home (flat
position).
STEP 3
：
Press and hold
HEAD
and on both remotes
at the same time for 5 seconds, or/until the blue
BACK LIGHTS FLASH
.
Press and hold
HEAD
and
HEAD
on both remotes
at the same time for 5 seconds, or/until the blue
BACK
LIGHTS FLASH
.
Press
and hold
Press
and hold
If simultaneous operation of two foundations is
desired, please follow the steps listed below.
Sync cable is not required if both
adjustable bases are equipped with
V2.0 or newer remote controls. If the
bases are equipped with V2.0 remote controls, follow
the “Wireless Syncing Instruction”.
If the adjustable bases are not equipped with V2.0 on
newer remote controls, follow the “Synchronizing
Two Foundation with Sync Cord” instruction.
Model No.:******
******
V2.0
Synchronizing Two Foundations with Sync Cord
STEP 1
：
Unplug foundations from the power source.
STEP 2
：
Connect the male ends of the sync cord to the female sync plugs of the control boxes
(Refer to below illustration).
STEP 3
：
Plug foundations back into the power source.
STEP 4
：
Check to ensure all cords are securely attached.Either remote will operate both
foundations simultaneously.
HEAD
FOOT
Remote Control
HEAD
FOOT
HEAD
FOOT
Sync Plug
Sync Plug
Control Box 1
Control Box 2
HD Motor
LED
APP
SYN
FT Motor
USB
Power
HD Motor
LED
APP
SYN
FT Motor
USB
Power
Sync Cord
