background image

Page  

Revision IR 

8/31/2020 

JC 

 

 

2877 Carrollton - Villa Rica Hwy   

 

Carrollton, GA 30116  

 

   770.838.7777 

 

350Z Hood Strut Kit 

Installation Guide 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 

 

 

PROLOGUE:

 

Study these instructions completely and thoroughly before proceeding to assemble. Installation can 
be completed using common tools and automotive procedures. The installer must have a thorough 
knowledge of automotive systems operation. If unfamiliar with any of the concepts outlined in this 

instruction, we recommend the installation be completed by a qualified professional. 
 

 

WARNING!

 

Extreme caution should be taken when performing ANY maintenance or performance 

upgrades to your Vehicle.  Please observe and abide by any Warning or Caution labels placed on the 
various components and tools used when servicing your Vehicle.  If you have any questions regarding 
installation or the various components included with the 350Z Hood Strut Kit, 

consult with a Professional Mechanic or contact Z1 Motorsports for more information. 

 

 

 

Содержание 350Z

Страница 1: ...f unfamiliar with any of the concepts outlined in this instruction we recommend the installation be completed by a qualified professional WARNING Extreme caution should be taken when performing ANY maintenance or performance upgrades to your Vehicle Please observe and abide by any Warning or Caution labels placed on the various components and tools used when servicing your Vehicle If you have any ...

Страница 2: ...der your Vehicle Always keep limbs and parts away from moving drivetrain parts Only operate drivetrain in safe space and well ventilated areas BEFORE YOU BEGIN Remove contents from the Z1 Motorsports 350Z Hood Strut Kit and verify that ALL necessary hardware is present Procedure 1 Assure the car s engine is turned off and place transmission in Park position or in Reverse gear if equipped with a ma...

Страница 3: ...nel so that it easily fits with the ball stud installed 7 Re install battery cover shroud Note The following steps are best completed with an additional person to help hold the hood of the vehicle 8 While holding the hood use a 12mm socket remove the 2 nuts securing the hood hinge to the hood 9 Install the Hood Strut Bracket onto the studs protruding from hood The ball end should point away from t...

Страница 4: ...lide over Hood Strut Bracket Ball If Socket End is not oriented in line to snap onto Ball simply rotate Strut Housing until aligned Note Socket End of Hatch Strut Assembly should snap onto Ball 13 Install locking pin by inserting through hole on ball end Once inserted rotate locking pin and snap into place 14 Repeat steps 2 12 for opposite side of the vehicle 15 Slowly lower hood Check for fitment...

Отзывы: