manualshive.com logo in svg

Motorola WT41NO, Руководство пользователя

Поделиться
Скачать
Motorola WT41NO Скачать руководство пользователя страница 49

Using the Wearable Terminal 2 - 17

Figure 2-14

Special Character Keyboard - Character Layer

Navigate the keypad in the same manner as described above. To return to the alphanumeric layer, press the 

CH

 key on the keypad.

Pressing 

CAP

 or 

SH

 switches the keypad to the upper case alphanumeric keypad.

Figure 2-15

Special Character Keyboard in upper case Alphanumeric Mode

Press the 

 key to close the Special Character keypad.

Resetting the Wearable Terminal

There are two types of resets, warm boot and cold boot. A warm boot restarts the wearable terminal by closing 
all running programs.

A cold boot also restarts the wearable terminal, but erases all stored records and entries in RAM. Data saved in 

flash memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the 
factory default settings.

Perform a warm boot first. This restarts the wearable terminal and saves all 

stored

 records and entries. If the 

wearable terminal still does not respond, perform a cold boot.

Performing a Warm Boot

Hold down the Power button for approximately five seconds. As soon as the wearable terminal starts to 
perform a warm boot release the Power button.

DRAFT

Содержание WT41NO





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды