SECTION 1
OVERVIEW
1-10 SECTION
1,
OVERVIEW
LED Description
The underlined items represent network activity.
LED
Condition
Color
Status
1 Power
ON
Green
The device is powered on and operating normally.
Blinking
Green
Firmware update is in progress.
Blinking/OFF
Red
The power LED turns RED as soon as the reset
button is depressed. If the reset button is held down
for more than 5 seconds, the LED starts to blink
and the router’s default user name, password,
private LAN IP address, and private subnet mask
address will be restored. The LED then turns off
until the reset button is released. The power LED
keeps blinking RED if the firmware is corrupted,
indicating the firmware needs to be restored.
2 Modem
OFF
None
No external Ethernet device has been attached and
detected. The Ethernet link is down.
ON
Red
The WAN interface has been disabled by the
firmware.
Blinking
Red
The WAN connection has lost IP connectivity with
its default gateway even though the Ethernet link is
still up. Or the WAN connection repair procedure is
still in progress.
ON/Blinking
Amber
10BaseT link detected/active traffic present.
ON/Blinking
Green
100BaseT link detected/active traffic present.
3 Wireless
OFF
None
No mobile station or Access Point has associated
with this device.
ON
Red
The wireless interface has been disabled by the
firmware.
ON/Blinking
Amber
802.11b connection exists in this wireless
domain/active traffic present.
ON/Blinking
Green
802.11g connection exists in this wireless
domain/active traffic present.
4 LAN (x4)
OFF
None
No external Ethernet device has been attached and
detected. The Ethernet link is down.
ON/Blinking
Amber
10BaseT link detected/active traffic present.
ON/Blinking
Green
100BaseT link detected/active traffic present.
