Motorola VML750, Руководство по установке

Страница: 26 / 65

Safety and General Information Chapter 2: VML750 Installation
• Select a location such that heat from the unit does not damage any wiring or any
other plastic or heat-sensitive parts of the automobile.
• Use the supplied mounting hardware.
•
Leave sufficient space around the VML750 unit for air flow and installation.
•
Select a location that permits routing the cables as directly as possible.
•
Ensure that the cables are not stretched, and not subject to heat from the engine,
transmission housing, or heating ducts.
• Crimp connectors securely.
• Do not run cables over sharp edges that may cause excessive wear or
chaffing of the cable insulation.
•
Do not install components in locations where they may cause interference
to the operation of the vehicle's controls.
• Only qualified personnel may install communication equipment.
• Ensure secure tightening of cable connectors.
Install this product in a vehicle in accordance with the vehicle manufacturer’s guidelines and the
instructions detailed in this manual. Use only the Motorola parts specified in this manual.
Check the required mounting locations. It might be necessary to penetrate the firewall to reach the battery.
Before drilling commences, ensure cable clearance on the opposite side of the firewall and do not install
the vehicle’s Electronic Control Modules (ECM’s) on the opposite side of the firewall. Protect the cable
where it passes through the firewall by using a grommet or similar protective measures.
Installing the VML750 at the end of the vehicle above the exhaust
pipe may cause the VML750 to overheat.
VEHICLES EQUIPPED WITH AIR BAGS
An air bag inflates with great force. DO NOT place objects, including
communications equipment, in the area over the air bag or in the air bag
deployment area. If the communication equipment is improperly installed
and the air bag inflates, this could cause serious injury.
If necessary, contact the vehicle manufacturer for air bag information specific to the vehicle.
Verify that none of the vehicle’s systems are affected by use of the
unit, e.g. cruise control, ABS breaking, traction control, engine
management, direction indicators, lights, etc.
2-2
6802988C54-B July 2014