VIP2502W Wireless IPTV Receiver Installation Guide
iii
Follow these important safety guidelines when positioning and connecting your wireless
receiver:
•
Do not block the slots and openings
•
Do not place anything on top of the wireless receiver
•
Do not position the wireless receiver in a confined space, such as an enclosed
cabinet, that does not provide adequate ventilation.
•
Do not position the wireless receiver near any external heat source that could
raise the temperature around the unit. Do not place the wireless receiver on top
of another heat producing electronic device.
•
Allow for adequate ventilation around the wireless receiver to maintain normal
operating temperature. Do not place it in a sealed enclosure without providing
for adequate airflow.
•
Use only the power adapter and cord supplied to connect the VIP2502W to your
home AC power outlet.
•
Do not plug the AC power adapter into a switched power outlet.
•
Always transport the receiver in its original factory carton, or in an equally well-padded
container.
•
Whether installed or being transported, do not expose the receiver to temperature
extremes. The temperature range for operation is from 0° to +40°C. The non-operating
(transport or storage) temperature range is from -40° to +60°C.
•
If the wireless receiver is used outdoors (patio, balcony, etc.), it should be protected
from moisture, temperature extremes, and from prolonged exposure to direct
sunlight, any of which could cause damage. Note also that adequate ventilation must
be maintained, even if the wireless receiver is operated outdoors.
This manual includes the manufacturer’s recommended safeguards and all the information
needed to connect your receiver to both your in-home IP network and your entertainment
system. The safety and installation information was developed and provided primarily by
the receiver manufacturer, Motorola Mobility, LLC.
