Motorola VC6000 Series, Руководство по продукции

Страница: 28 / 164

1 - 10 VC6000 Series Product Reference Guide
Resetting the VC6000 Series
If the VC6000 Series stops responding to inputs, perform the reset actions in the following order:
Warm Boot
Warm boot may become necessary when an application running on your VC6000 Series does not respond after
performing initial reset.
To perform warm boot:
Press and hold the Power Button for five seconds and release.
Cold Boot
Cold boot may become necessary when your VC6000 Series is jammed and does not respond after performing
warm boot.
Cold boot restarts the VC6000 Series by performing an ungraceful shutdown of all running applications and
powering off the VC6000 Series. Cold boot resets information stored in all running applications. Data saved
on flash memory or a memory card is not lost.
To perform a cold boot:
Press and hold + + Power Button .
You can also perform cold boot by holding the Power Button pressed for 25 seconds.
Clean Boot
Clean boot may become necessary when your VC6000 Series is jammed and does not respond to cold boot.
A clean boot resets the VC6000 Series to the factory default settings. All applications installed by your organization
are erased and should be re-installed on the VC6000 Series.
To perform a clean boot:
Press and hold + + Suspend Button + Left Soft Key . The VC6000 Series starts to boot
and the splash screen is visible.
Function Keys
The five function keys on the front right hand side of the panel can be set to perform dedicated functions, such
switching between different software application screens. To know more about the function of each key, refer to
your enterprise application guide. To program the operation of the Function keys, refer to the VC6000 Series
Software Enterprise Mobility Developer Kit for C (EMDK).
CAUTION Warm boot may cause lost of information from programs currently running on the computer.
CAUTION A clean boot should only be performed by an authorized system administrator. Removing power from
the VC6000 during a clean boot may render the VC6000 inoperable.