Motorola TX77, Быстрая справка

Страница: 12 / 66

English 10
Using Your Phone
The Display
The Liquid Crystal Display (LCD)
on your phone can display two
rows of twelve alphanumeric
characters as well as useful
information symbols.
The various elements of the display are as follows:
ABC123
Characters are used to display messages and
telephone numbers.
q
Battery Charge Level . When the battery is fully
charged this symbol will be on. As the battery
charge is used, the symbol will begin to flash
slowly. The flash will become rapid when the
battery is nearly depleted. Replace or recharge
the battery at this point.
rx
Signal Strength . The more segments displayed
in the bar graph, the better the signal strength.
j Power On . Displayed while your phone is
switched on.
k
In Use . Displayed when a call is in progress.
l
Roam . This symbol will be on, or flashing, when
you are registered on a system other than your
home system.
On , for preferred networks.
Flashing , for non-preferred networks.
m
No Service . This symbol will be on when you are
out of cellular system coverage, you will not be
able to make or receive calls.
The symbol will flash, when you are in an area
with coverage but are not registered on the
system. You will be able to make emergency calls
using the special GSM emergency number, 112,
but cannot make or receive ordinary calls.
o
Short Message Service . When the phone has
received a message this symbol will be on. The
symbol will flash when your message storage
area is full.
Low Temperature Use
The liquid crystal display screen used in your phone will behave
differently at extremely low temperatures. You may notice that
the display responds slowly to key presses, this is to be
expected and does not affect the phone operation in any way.
Locking the Keypad
To prevent accidental usage of the phone it is possible to 'lock'
the keypad. To activate the lock press the
<
and
>
keys
simultaneously.
You will be able to answer an incoming call by pressing the
O
key. If you answer a call in this manner the keypad lock
will be automatically switched off .
To remove the keypad lock press the
<
and
>
keys
simultaneously.