Motorola Symbol DS9808-DL00007C1WR Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 80

background image

ii

Symbol DS9808-R Product Reference Guide Supplement

© 2010 by Motorola, Inc. All rights reserved.

No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,
without permission in writing from Motorola. This includes electronic or mechanical means, such as
photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to
change without notice.

The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on
a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each
software or firmware program delivered hereunder (licensed program). Except as noted below, such license
may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of
Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under
copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with
other program material, create a derivative work from a licensed program, or use a licensed program in a
network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on
the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in
whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed
program delivered to the user or any portion thereof.

Motorola reserves the right to make changes to any software or product to improve reliability, function, or
design.

Motorola does not assume any product liability arising out of, or in connection with, the application or use of
any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc.,
intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in
Motorola products.

MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the US Patent &
Trademark Office. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync
are either registered trademarks or trademarks of Microsoft Corporation. All other product or service names
are the property of their respective owners.

Motorola, Inc.
One Motorola Plaza
Holtsville, New York 11742-1300

http://www.motorola.com/enterprisemobility

Warranty

For the complete Motorola hardware product warranty statement, go to:

http://www.motorola.com/enterprisemobility/warranty

«
...
2
3
4
5
6
...
»

Содержание Symbol DS9808-DL00007C1WR

















































































Отзывы:

Нет отзывов

Похожие инструкции для Symbol DS9808-DL00007C1WR

Бренд: Accu-Sort Страницы: 2

Бренд: Tolino Страницы: 12

Бренд: GeoVision Страницы: 44

Бренд: Conceptronic Страницы: 21

Бренд: LG Страницы: 72

Бренд: LG Страницы: 178

Бренд: Stanley Страницы: 64

Бренд: Motorola Страницы: 422

Бренд: Motorola Страницы: 263

Бренд: Motorola Страницы: 440

Бренд: Toshiba Страницы: 45

Бренд: Toshiba Страницы: 58

Бренд: Toshiba Страницы: 132

Бренд: IconBiT Страницы: 28

Бренд: Dataman Страницы: 7

C33-00-486000Z4

Бренд: Datamax Страницы: 10

Бренд: Nordic ID Страницы: 20

Бренд: Allflex Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды