B
SBV5122U Cabling Instructions • Wall Mounting the SBV5122
10
SBV5122 Digital Voice Modem • Installation Manual
568756-001-b
Windows Vista
1.
On the Windows Vista desktop, click
Start
.
2.
Click
All Programs
.
3.
Click
Accessories
.
4.
Click
Run
to display the Run window.
5.
Type
cmd
and click
OK
to open a command prompt window.
6.
Type
ipconfig
and press
Enter
to display the IP Configuration.
If an
Autoconfiguration IP Address
appears, there is an incorrect connection between your PC
and the digital voice modem (check the cable connections and your television service), or you may need
to renew your IP address.
Renewing Your IP Address in a Windows XP or Vista
1.
Click
Start
.
2.
Select
Run
.
3.
Type
cmd
and click
OK
.
4.
Type
ipconfig /renew
and press
ENTER
. If a valid IP address is displayed as shown,
Internet access should be available.
5.
Type
exit
and press
ENTER
to return to Windows.
If problems persist, contact your Internet Service Provider.
Wall Mounting the SBV5122
Before wall mounting the SBV5122:
•
Locate the unit as specified by the local or national codes governing residential or business
cable TV and communications services.
•
Follow all local standards for installing a network interface unit/network interface device
(NIU/NID).
•
Make sure the AC power plug is disconnected from the wall outlet and all cables are
removed from the back of the SBV5122 before starting the installation.
•
Determine which direction the SBV5122 will be mounted (horizontally or vertically).
•
Review the hardware dimensions in the diagram below to avoid damaging the mount surface
and/or the product.
