6
Getting started
On the S12 base:
1. Press and hold
b
for 3 seconds until you hear two beeps. The base will remain in
registration mode for 90 seconds.
On the S12H handset:
1. Press
m
, scroll
d
to
REGISTER
and press
m
.
2. Scroll
d
to
REG BASE
and press
m
.
3. Enter the base number (1 - 4).
The base numbers that are already in use flash. The display shows
SEARCHING...
.
4. When the handset finds the base signal, the display shows
SEARCHING...X
, where
X
indicates the base identification number.
5. The display will ask for the PIN to be entered. Enter the 4 digit PIN code (default =
0000) and press
m
. You will hear a beep if the registration is successful. The handset
is automatically assigned an available handset number. Use this number when making
internal calls.
NOTE
If registration is not successful the first time, please repeat the process again in case the
base registration period ran out of time. If the base is not found after a few seconds, the
handset returns to standby. Try registering again.
If there are already 5 handsets registered to the base, the registration will fail. You must
de-register another handset before you can register a new one.
1.5.2 De-register a handset
Use one handset to de-register another. You cannot de-register the handset that you are
using.
1. Press
m
, scroll
d
to
SETUP
and press
m
.
2. Scroll
d
to
DEL HANDSET
and press
m
.
3. Enter the 4 digit PIN code (default = 0000) and press
m
.
4. Enter the handset number that you want to de-register. You will hear a confirmation
beep and the display will return to the previous menu.
Содержание STARTAC S1201H
Страница 16: ... This page has been intentionally left blank ...
Страница 17: ... This page has been intentionally left blank ...
Страница 18: ... This page has been intentionally left blank ...