Motorola SRX 2200 MODEL 3.5 Скачать руководство пользователя страница 110 | Manualshive

Страница: 110 / 236

Motorola SRX 2200 MODEL 3.5 Скачать руководство пользователя страница 110

Radios configured as Supervisor are able to cancel
emergency mode of other radios in a talkgroup without
initiating emergency.

Dispatch console that supports this feature must be
preprogrammed to use this feature.. Check with your dealer
or system administrator for more information on dispatch
console supporting this feature.

To exit emergency:

Emergency
mode

Action

Initiated by
other radios

Press and hold

Side Button

1

and short press

Emergen-

cy

button.

Initiated by
Supervisor

Do one of the following:

• Long press

Emergency

button.

• Press and hold

Side But-

ton 1

and short press

Emergency

button.

• Wait for console to clear

emergency.

NOTICE:

The following buttons combination are
supported.

• Radio

Side Button 1

and

Orange

button.

• Radio

Side Button 1

and accessory

Orange

button.

• Accessory

1-dot Button

and radio

Orange

button.

• Accessory

1-dot Button

and accessory

Orange

button.

Sending an Emergency Alarm

This feature allows you to send a data transmission, which
identifies the radio sending the emergency, to the
dispatcher.

English

110

«
...
108
109
110
111
112
...
»

Содержание SRX 2200 MODEL 3.5













































































































































































































































Отзывы:

Нет отзывов