Motorola SM56 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 48

background image

•

Receive data at up to 56 Kbps in V.90 or K56flex modes

•

Get automatic fallback to V.34 (33.6 Kbps) rates in bad line conditions and on non-
V.90/K56flex headends

•

Use your computer as a telephone answering machine (TAM)

•

Send and receive faxes on your personal computer at rates up to 14.4 Kbps

•

Use your computer as a video phone to place and receive video phone calls
(Data/Fax/TAM/Speakerphone modem with video equipment)

•

Use your computer to conduct hands-off speakerphone voice calls
(Data/Fax/TAM/Speakerphone modem)

Important
The SM56 ISA modem runs on Windows 95, Windows 98, and it can be used by applications that
run in an MS-DOS box (under Windows 95/98). Windows 95 and Windows 98 use the same
SM56 software builds.

The SM56 PCI modem also runs on Windows 95 and Windows 98. It does not directly support
Windows 95/98 DOS box applications. Refer to the Troubleshooting section for information on a
third party COM port virtualizing/trapping application that allows the SM56 PCI modem to be
used with DOS box applications.

Personal-computer OEMs that incorporate the SM56 can benefit from sizable cost reductions,
hardware reduction, and lower power consumption. End users benefit from quick, easy and
affordable software upgrades, which help them keep current with the latest communications
technology.

Please check with your direct modem supplier for the latest software updates and other product
information.

3

Personal Computer Requirements

Motorola performs rigorous, exhaustive testing on its modems. It developed a list of recommended
personal computer features that perform well with the SM56. The information includes qualified
CPUs, Level 2 cache requirements, operating systems, RAM requirements, and third-party sound
card compatibility. However, in today's dynamic technology markets, it is not possible to test all
components and combinations on all systems.

This section outlines minimum system requirements for SM56 operation. On these systems, CPU
loading was found to be acceptable and the modem demonstrated good performance over the entire
network model.

Important: SM56 operation is not limited to the personal computer systems listed here.

Recommended CPUs

The SM56 modem has been qualified (tested for processor loading and TSB network model
coverage) on the following processors:

«
1
2
3
4
...
»

Содержание SM56

















































Отзывы:

Нет отзывов

Похожие инструкции для SM56

Бренд: Kathrein Страницы: 16

Бренд: Kasda Страницы: 5

Бренд: Kasda Страницы: 6

COMSPHERE 3800PLUS

Бренд: Paradyne Страницы: 4

Бренд: Paradyne Страницы: 16

Бренд: Paradyne Страницы: 2

COMSPHERE 3000 Series

Бренд: Paradyne Страницы: 131

Бренд: Dataradio Страницы: 68

Бренд: Black Box Страницы: 28

Бренд: VKOM Страницы: 24

Бренд: MultiModem Страницы: 88

Бренд: Eaton Страницы: 2

HFB-FO-LON Series

Бренд: Bueno Electric Страницы: 7

Skywire LTE CAT1

Бренд: NimbeLink Страницы: 25

Бренд: Franklin Страницы: 38

Бренд: Lovato Страницы: 5

Бренд: Xeline Страницы: 19

Бренд: Lanex Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды