Motorola SCOUT1-B, Руководство пользователя

Страница: 16 / 26

created by: Pro. Q.C. Systems Design Limited
30
31
4.7 Adding another Camera:
Working with iPhone
®
/iPad
®
Follow the same steps as under
3.3 User Account and
Camera Setup, Working with iPhone ® /iPad ® .
5. Procedure for resetting the Camera
Note: If your camera is moved from one router (e.g. home) to
another router (e.g. office) or you have camera setup issues,
then this camera must be reset again, and then the camera set
up again for devices for Android TM or iPhone ® /iPad ® .
1. Switch the ON/OFF switch to ON.
2. Press and hold the RESET button on the underside of
the camera for 5 seconds, until you hear a beep sound.
3. Release the RESET button and wait for the camera to
complete the internal reset procedure.
4. After about 60 seconds you will hear two short beeps and
the green LED will start blinking.
• Please be patient, it may take a few minutes until your camera
appears in your Wi-Fi ® devices list, or is added to your account.
Adding another Camera: Working with iPhone
®
/iPad
® 30
Procedure for resetting the Camera 31
ENGLISH
Tap Cameras to return to the Camera list.
Tap on to add another camera to the list.
• Tap on Edit:
• Tap Remove to take a camera off the list.
• Tap Rename to give a camera a new name.
• Tap Alert Settings to receive notifications if a noise is
detected or the temperature in environment is too high or too
low.
• If you use Alert Settings, under Settings on your iPhone ® /
iPad ® , select Notifications > Camera > Notification Center
ON .
• Select your preferred Alert Style and return to the application
and tap Done .
• Tap Cancel to return to the camera list.
• Tap on Account to change the password.
• Tap on Logout to leave the account.
P130082_Scout1_UG_US_EN_V5_2013_08_19.indd 30-31 19/08/2013 3:41 PM