4. If using the optional Motorola External Diversity Antenna, install it now.
Follow the instructions in Installing the Optional External Diversity
Antenna.
5. Insert the CD-ROM into the CD-ROM drive.
6. Plug the power cord into the power connector on the SBG1000.
7. Plug the power cord into the electrical outlet.
8. Check that the lights on the Front Panel cycle through the following
sequence:
a. Power icon turns on when AC power is connected to the SBG1000
and indicates that the power supply is working properly.
b. RX (receive) light flashes while scanning for the receive channel
and changes to solid green when the receive channel is locked.
c. TX (transmit) light flashes while scanning for the send channel and
changes to solid green when the send channel is locked.
d. LNK (link) light flashes during SBG1000 registration and
configuration and changes to solid green when the cable modem
wireless gateway is registered.
e. Globe icon flashes when the SBG1000 is transmitting or receiving
data.
Before using the modem, complete the following:
1. Connect to the computer using Ethernet, USB, or Wireless.
2. Connect the cable line from Time Warner Cable to the cable port of the
gateway.
3. Connect the power adapter.
Back to Top
The following figure illustrates a typical Ethernet installation:
