Installation
and
Operation
3-47
SURFboard Cable Modem Installation Manual
Solutions
If you choose not to run the Motorola Remove program, you can perform the procedures in
Solution 1 or Solution 2. Review both solutions before choosing which one to run.
Solution 1
1
Leave the USB cable plugged into the SURFboard cable modem and the computer.
2
From the Windows Desktop, right-click the
My Computer
icon to display a list of options.
3
Click
Properties
at the bottom of the list. The System Properties window is displayed.
4
On the System Properties window, click the
Device Manager
tab.
5
Expand the Universal Serial Bus controllers branch and see if there is an entry for
USB
Composite Device
. The following additional entries are automatically removed when the
USB Composite Device is removed:
#
Windows 98 Second Edition may list two entries as
USB Cable Modem
under
Other
Devices
.
#
Windows 98 may list two entries as
Unknown Devices
under
Other Devices
.
These additional entries are automatically removed when the USB Composite Device is
removed.
6
Select the
USB Composite Device
and click
Remove.
CAUTION!
Extremely Important:
After removing the USB composite device
,
disconnect the USB cable from the SURFboard
cable modem and reboot the PC. To reinstall the USB drivers, follow the instructions in “Setting Up a USB Driver
for Windows 98”, page 3-5
Содержание SB5100 - SURFboard - 38 Mbps Cable Modem
Страница 100: ...501652 001 01 03 MGBI ...
